Tonner okpukpu abụọ MX2626D
Foto ngwaọrụ
Isi nka nka
| Nkọwa na Nlereanya | MX2626D |
| Ọsọ inye nri (m/min) | 6-30m/min |
| Oke.Ogologo arụ ọrụ (mm) | 800mm |
| Min.Ogologo ọrụ (mm) | 100mm |
| Oke.Ogologo ọrụ (mm) | 2600mm |
| Min.Ogologo ọrụ (mm) | 300mm |
| Oke.Ọkpụrụkpụ arụ ọrụ (mm) | 60mm |
| Min.Ọkpụrụkpụ arụ ọrụ (mm) | 10mm |
| Vetikal wee pịa mgbanwe ntughari aro (r/min) | 6000/6000-8000r/min |
| Dayameta osisi kwụ ọtọ na pịa (mm) | Φ40mm |
| Dayameta igwe ihe igwe kwụ ọtọ (mm) | Φ160-200mm |
| Pịa dayameta igwe-egwe ọka (mm) | Φ180mm |
| Dayameta rọba na-eri nri (mm) |
|
| Ike moto kwụ ọtọ (kw) | 3kwx6 set |
| Ike moto eriri eriri kaadi kaadị (kw) | 2.2kwx2sets |
| Ike moto na-enye nri (kw) | 3kw |
| Ike moto elevatory (kw) | 0,75kw |
| Ike moto na-ebuli elu (kw) | 0.75kw (moto oghere obosara) |
| Mgbakọta ike (kw) | 26,9kw |
| Nrụgide ikuku (MPa) | 0.6MPa |
| Akụkụ anụ ahụ (mm) | 3450x2600x1670mm |
Nkọwa
Nhazi ELECTRONIC/PNEUMATIC/ njikwa
Ihe ntụgharị ugboro usoro nri
Nọmba ugboro ugboro na-egosi na ọsọ nnyefe bụ 6-60 mita / nkeji, ọrụ dị mma, belata ọrụ, nchekwa ike, belata ọsọ ọsọ na-agbanwe agbanwe.
Ihe ndị a nakweere PLC na njikwa mgbanwe ugboro ugboro iji hụ na igwe kwụ ọtọ
Spindle ziri ezi
A na-agbakọta ma nwalee spindle ọ bụla n'ime ụlọ na-enweghị uzuzu.SKF na-ebu na njedebe okpukpu abụọ tupu emechaa.spindle dị ezigbo mma na-eme ka elu na-enweghị ihe ọ bụla siri ike
Jiri mkpakọ efere apịaji, bench ọrụ inyeaka siri ike nke ukwuu iji hụ na a na-arụ ọrụ nke ọma.
Egwu (na-agbagharị) nwere ahịhịa dị ọcha, okporo ụzọ ụgbọ okporo ígwè ejiri ihe siri ike tinye, gbatịa igwe.
Ndụ ọrụ nke ngwaọrụ.
A na-edozi obosara site na iji ịghasa bọọlụ nkenke dị elu
Ngosipụta njikwa ọnụ ụzọ magnetik na-agbasawanye nkenke
Akara eriri ogologo, dabara maka nhazi efere ogologo, nkwụsi ike na-arụ ọrụ nke ukwuu.
Mwepụta moto na-emekọrịta ihe, siri ike ma dị ike
